Introducing a NEW Aluminium Roof Trim - ideal for use on small flat roof extensions, garden rooms, car ports, office pods and sheds.
- Available as standard in three widths:
Made to order from 1.5mm thickness aluminium polyester powder coated (PPC) in 27 standard Matt colours for delivery in 10working days,
For plain mill finish - please get in touch
Simple installation – components consist of: 3m lengths, 90 angles; left-hand and right-hand stopends; (upstand stop ends; and junctions - get it touch if you need either of these),
No fancy jointing – just use 2 beads of silicone on the Joiner Bracket supplied,
No fancy fixings – just use standard screws, size recommended is countersunk screw 4.0 (No.8) max.- length will vary dependent on substrate, in general 40mm/1.5”
Use the trim detail over the top of your chosen membrane sheeting.
- 100mm (to edge/trim/cap 75mm-100mm wide upstands)
- 125mm (to edge/trim/cap 100mm-125mm wide upstands)
- 180mm (fto edge/trim/cap 125mm-180mm wide upstands)
Only for use at heights no greater than 3m with the flat front edge to the outside of the building and the sloping back edge on the inside/flat roof side.
Download the installation guide