Halifax Drain

Halifax Drain is a below ground socketless system and like Halifax Soil fully complies with BS EN 877:1999 + A1:2006 Incorporating Corrigendum 2008 and certificated by BSI Kitemark (Cert No. KM 684754) and BBA (Cert No. 06/4401).These products have passed all the initial testing and rigorous on going testing to ensure the BS EN 877 is met. Independent testing is carried out on an annual basis. Our digital catalogue containing all technical, product and installation information is available at www.soilanddrain.co.uk

Benefits

• • Halifax Drain pipes are strong and highly resistant to sheer loads
• • Low risk of settlement damage
• • Require less embedment and extra protection saving time and money
• • High resistance to distortion and less likely to be damaged by vigorous rodding
• • Long life expectancy (in excess of 100 years)
• • Cast Iron is 100% recyclable and a sustainable material
• • PUSH FIT COUPLINGS NOW AVAILABLE

The Halifax Drain system pipes are lined internally with a two part grey epoxy finish which provides improved performance when exposed to aggressive substances. The pipes in this system are coated with an average dry film thickness of 170 microns. Pipes with an exterior coating in grey and interior coating in yellow have average dry film thicknesses of 130 microns and 170 microns respectively. Fittings are also epoxy coated in grey. Halifax Drain coatings have been tested successfully for resistance to attack by salt spray, waste water, hot water cycling and solution of acid at PH2 and alkalis at PH12.